Skip to main content
Sign in

AT1

Marisa Potgieter
  • Updated

Professional device AT1

Asset Tracker AT1 User manual The AT1 Device provides you with constant visibility on the location of your high-value assets, thus reassuring you that they are safe and secure. BeWhere manufactures the AT1, and the device reports to their servers. Fleet Complete uses an API service to pull data to display the information in the Fleet Complete application. In this manual, we will discuss the overview of the ATI GEN Q devices.

Key benefits

AT1 supports the following sensors:

  • Internal Battery Level,
  • Temperature (ambient).
  • Barometric Pressure (ambient),
  • Light (ambient),
  • Humidity (ambient),
  • External Temperature (Applies to the AT1 Wired)
  • Ignition State (Applies to the AT1 Wired)
  • Input State (Applies to the AT1 Wired)
  • Analog data (Applies to theAT1 Wired)

Let's review the key features of the AT1 devices below:

  • Operates on the LTE-M low power network.
  • 2G fallback for cases
  • One of the market's smallest and most affordable asset trackers.
  • Captures humidity, temperature, light and impact stats.
  • Additional external sensors such as ignition and temperature.
  • Applicable to any non-powered device.
  • Quick and easv install.
  • Easy to disguise and install covertly.

AT1 models: AT1 Solar

  • It uses a rechargeable 3.7 V 2700 mAh Lithium- Polymer battery.
  • Up to 5-year battery life with one ping a day or 1500 snapshots on a full charge.
  • Wakes up on the scheduled Device Data Settings (DDS), interval to transmit location and sensor data, and then returns to sleep mode.
  • Option to enable motion detection from the Device Data Settings module

​​AT1 models: AT1 Wired

  • It uses a rechargeable 3.7 V 2700 mAh Lithium-Polymer battery.
  • Up to 5-year battery life with one ping a day or 1500 snapshots on a full charge.
  • Wakes up on the scheduled Device Data Settings (DDS), interval to transmit location and sensor data, and then returns to sleep mode.
  • Option to enable motion detection from the Device Settings module.
  • Support ignition detection.
  • Support 4 external temperature probes.
  • Support one input and analog sensor.
  • External power range 6-40 Volts
Pink Power IN (8.5-40 VDC)
Black Ground
Grey Ignition IN (5.5-40 VDC)
White 1-Wire
Blue Analog input (12V)
Brown Power OUT (5VDC)

Installing the AT1

  1. Determine the optimal mounting location of the Device, ensuring that it will not interfere with the regular operation of the asset.
  2. The device should be mounted vertically on a flat surface with the sensor opening on the upper side and a clear line of sight to the sky for optimal GPS coverage.
  3. Use two self-tapping screws to mount the device on a flat mounting surfac

Notes:

  • Do not overtighten the self-tapping screws as they will crack the base.
  • Avoid mounting the device under heavy metal as this will reduce range and effectiveness of GPS and cellular transmission.
  • Zip ties or 3M double-backed tape can be used in interior or non-permanent installations.

Configuring device data settings for AT1

To configure the AT1, you can modify the Device Data settings (DDS) on FC Plus. This allows users to update the values for Stationary Transmit Interval, Enable Motion Detection, and Moving Transmit Interval.

  1. Log in to FC Plus
  2. From the main toolbar, click Settings
  3. Go to Vehicles tab
  4. Pick up AT1 device from the list
  5. Go to AT1 data settings tab:

There is a special report called "AT1 Track". It will show all the information from AT1 device including temperature, humidity, battery level etc.

Powered by Zendesk