Self install device ftd datasheet
Related Manuals
- FTe installation guide for heavy duties
- FCPlus Getting started
- FCPlus FAQ
- Reports management
- Autolog settings
FTd datasheet
FTd (Fleet Tracker dongle FMM003) Provider: Teltonika Benefits: Real-time fleet monitoring, Advanced Plug & Play OBDII tracker.
| Detailed specifications | FTd |
|---|---|
| Module | Quectel BG95-M3, Teltonika TM2500 Technology: LTE CAT M1/CAT NB2/EGPS/GNSS/BLUETOOTH |
| GNSS | GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS Tracking sensitivity - 165 dBM Position Accuracy < 3 m Hot start < 1 s Warm start < 25 s Cold start < 35 s |
| Cellular | LTE CAT M1, CAT NB2 |
| Power | Input voltage range 10 - 30 V DC with overvoltage protection Internal Back-up battery 170 mAh Li-lon battery 3.7 V (0.63 Wh) Internal fuse 3 A, 125 V Power consumption: At 12V < 3 mA (Ultra Deep Sleep) At 12V < 5 mA (Deep Sleep) At 12V < 16 mA (Online Deep Sleep) At 12V < 18 mA (GPS Sleep) At 12V < 33 mA (nominal with no load) At 12V < 2A Max. (with full Load / Peak) |
| Bluetooth | 4.0 + LE Supported peripherals Temperature and Humidity sensor, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support |
| Physical specification | Dimensions 67.2 × 49.6 × 25 mm (L× W × H) Weight 63 g |
| Operating environment | Operating temperature (without battery) -40 °C to +85°C Storage temperature (without battery) -40 °C to +85 °C Operating humidity 5% to 95% non-condensing Ingress Protection Rating IP41 Battery charge temperature 0 °C to +45 °C Battery discharge temperature -20 °C to +60 °C Battery storage temperature - 20 °C to +45 °C for 1 month - 20 °C to +35 °C for 6 months |
| Interface | Connection OBDII socket GNSS antenna Internal High Gain GSM antenna Internal High Gain USB 2.0 Micro-USB LED Indication 2 status LED lights SIM Micro-SIM Memory 128MB internal flash memory |
| Features | Accelerometer sensor Green Driving Sleep modes: GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep Time Synchronization GNSS, NITZ, NTP Fuel monitoring OBDII Ignition detection by Accelerometer, Engine RPM |
| Certification | Regulatory CE RED, E-Mark, RCM, Jate/Telec |
Standard Configuration
| Reason | FTd settings |
| Min.Period | 60 seconds |
| Min.Distance | 1000 meters |
| Min.Angle | 10 degrees of direction change |
| Min.Speed Delta | 20 km/h of speed change |
| HeartBeat | 1 hour |
| Sleep mode | After 5 minutes since ignition OFF |
| Ignition sensing | Accelerometer sensor |
Verticals FTd device can be used in the following verticals:
- Transportation
- Business
Use cases Advanced tracking when self install is required on vehicles with OBDII port.