Professional device FTE lite datasheet
Related Articles
- FTe installation guide for heavy duties
- Ruptela CAN and OBD parameters vs FCPlus properties
- Ruptela light vehicles OBD Y vs hardwire harness
FTe Lite datasheet
Provider: Ruptela Benefits: Real-time high-accuracy fleet monitoring, driver behavior monitoring, I/O sensors, CAN-bus data for light commercial vehicles.
The fleet tracker FTe Lite includes hardware and OBD wire harness shipping, professional installation included (connect OBDII adapter).
FTe Lite OBD wire harness includes buzzer, a 6-pin connector for RFID reader and a 2-pin connector for the immobilizer.
Detailed specifications
| Detailed specifications | FTe Lite |
|---|---|
| Enviromental specifications | Temperature Operating: -20 to +60 °C Storage: -20 to +45 °C Battery charging: 0 to +45 °C Relative humidity: 5% to 95% Non-condensing |
| Electrical Specifications | Power supply range: 9-32 V DC Internal battery: LiPo 3.7 V 1050 mAh Protections Batter and a 1-Wire power line short circuit protection Reverse polarity protection Electrostatic discharge protection on USB, SIM card slot and 1-Wire data line Overcurrent protection on 1-Wire power line Overvoltage protection on analog inputs Charging protection 2 amp fuse on the power line |
| Connectivity | Fibocom MC610-EU modem - LTE CAT1 bis/GSM Antenna: Internal Bands (LTE FDD): B1/B3/B7/B8/B20/B28 Bands (GSM): 900/1800 MHz Ublox EVA M8M 72-channel - GNSS module Antenna: Internal Positioning systems: GPS, GLONASS, Galileo Augmentation systems: QZSS, SBAS (WAAS, GAGAN, EGNOS, MSAS) Aided start services: AssistNow Online (A-GPS) Tracking sensitivity: -154 to -164 dBm Reacquisition sensitivity: -152 to -160 dBm Cold start duration: < 30 S Aided start: As low as 3 s Navigation update rate: 10 Hz Horizontal position accuracy: 2.5 m (CEP, 50%, 24 hours static, -130 dBm, > 6 SVs) Bluetooth module: Bluetooth version: 5.0 Low energy |
| Interfaces | 3 x Digital inputs Ignition connected on Digital input 1 Voltage range: 0 - 30 V DC Voltage threshold: 4 V DC Voltage threshold when inverted: 250 mV DC 2 x Analog inputs Voltage range: Resolution: 0 - 30 V DC 12 bit 2 x Digital outputs Maximum voltage: 32 V DC Maximum current: 1 A @ 25 °C 2 × CAN interfaces High-speed CAN interfaces: 2 FMS, J1939, HCV CAN, LCV CAN, OBD (including proprietary manufacturer data) and tachograph data reading 1-Wire interface Power output: 300 mA @ 4.5 V DC Button DS1990A, DS1971, DS1982 up to 4 DS18B20 temperature sensors User interfaces Micro USB interface Indication LED |
| Features | Internal storage: 16MB Accelerometer: Built-in 3-axis (auto-calibrating, impact detection, motion sensing, tilt detection, g-force up to 16 g) |
| Certifications | E-mark, CE, EAC*, CITC, WEEE *In progress |
| Physical Properties | Dimensions: 101 × 74 × 23 mm Weight: 120 ‡ 1 g Housing: Plastic |
Standard Configuration
| Reason | FTe Lite settings |
| Min. Period | 60 seconds |
| Min. Distance | 1000 meters |
| Min.Angle | 10 degrees of direction change |
| HeartBeat | 1 hour |
| Sleep mode | After 5 minutes since ignition OFF |
| Ignition sensing | DIN1 - Physical ignition signal |
Verticals
FTe Lite device can be used in the following verticals:
- Supply / Cold Chain
- Transportation
- Agricultural
- Business
Use Cases
Advanced tracking when permanent installation is required on light commercial vehicles.
Additional Documentation Supported vehicles Manufacturer documentation