Professional device fte datasheet
Related Articles
- FTe installation guide for heavy duties
- Ruptela CAN and OBD parameters vs FCPlus properties
- Ruptela light vehicles OBD Y vs hardwire harness
FTe datasheet
Connectivity
| LTE Cat M1/NB-loT option | Modem 1*: Quectel BG95 Antenna: Internal Frequency bands @ 2G (GSM): 850/900/1800/1900 MHz (GPRS multi-slot class 33) Bands @ 4G (LTE Cat M1): B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85 Modem 2*: Quectel BG96 Antenna: Internal Frequency bands @ 2G (GSM): 850/900/1800/1900 MHz (GPRS multi-slot class 33) - depends on component availability - available upon request |
| GNSS module | Module: U-blox EVA-M8M Antenna: Internal and external (available as an additional accessory) Positioning systems: GPS, GLONASS, Galileo Augmentation systems: QZSS, SBAS (WAAS, GAGAN, EGNOS, MSAS) Aided start services: AssistNow Online (A-GPS) Tracking sensitivity: -154 to -164 dBm Reacquisition sensitivity: -152 to -160 dBm Cold start duration: < 30 s Aided start: As low as 3 |
| Bluetooth module | Module: NRF52832 Bluetooth version: 5.1 Low energy |
Interfaces
| 4 × Digital inputs | Voltage range: 0 - 30 V DC Voltage threshold: 4 V DC Voltage threshold when inverted: 250 mV DC |
| 4 x Analog inputs | Voltage range: 0 - 30 V DC Resolution: 12 bit |
| 4 × Digital outputs | Maximum voltage: 32 V DC Maximum current: 1 A @ 25 °C |
| 2 x CAN interfaces | FMS, HCV CAN, LCV CAN, OBD (including proprietary manufacturer data) and tachograph data reading |
| K-Line interface | Tachograph data reading |
| 1-Wire interface | Power output: 300 mA @ 4.7 V DC RFID Reader/Button, up to 4x DS18B20 temperature sensors |
| User interfaces | Micro USB interface 3 x Indication LEDs |
| Connections | 16 PIN and 14 PIN Molex |
Features
| Internal storage | 8 MB (max. 39000 records) |
| Additional storage | MicroSD card up to 32GB (max. 250M records) |
| Accelerometer | Built-in 3-axis (auto-calibrating, motion sensing, tilt detection, g-force up to 4 g, driving behaviour) |
Environment
| Operating temperature | -20 ° to +45 ° C |
| Storage temperature | -20 ° to +45 ° C |
| Relative humidity | 5% to 95% Non-condensing |
Electrical specification
| Power supply range | 9 - 32 V DC |
| Internal battery | LiPo 3.7 V 1050 mAh |
| Protections | Battery and a 1-Wire power line short circuit protection Reverse polaritv protection Electrostatic discharge protection on USB, SIM card slot and 1-Wire data line Overcurrent protection on a 1-Wire power line and digital outputs Overvoltage protection on analogue inputs Charging protection 2A fuse on the power line |
| Average power consumption @ 12 V DC | |
| Operating (battery charging) | Normal operation (data sending interval ~15 s): ~160 mA Normal operation (constant link enabled): ~155 mA Peak value: ~260 mA |
Sleep mode (without battery charging)
| @12V | @24V | ||||
|---|---|---|---|---|---|
| GPS ON | modem ON | const.link ON | 1w ON | 38.5-40.0 | 23.3-23.8 |
| GPS ON | modem OFF | 1w OFF | 23.6-24.4 | 15.5-16.3 | |
| GPS OFF | modem ON | const.link ON | 1w ON | 21.5-22.2 | 14.4-14.9 |
| GPS OFF | modem ON | const.link ON | 1w OFF | 14.1-14.9 | 10.0-10.4 |
| GPS OFF | modem ON | const.link OFF | 1w ON | 21.4-22.2 | 14.4-14.9 |
| GPS OFF | modem sleep | 1w ON | 15.5-16.8 | 11.0-11.8 | |
| GPS OFF | modem OFF | 1w ON | 14.9-15.6 | 10.7-10.8 | |
| ALL OFF | 7.5-7.7 | 5.7-5.8 |
Physical properties
| Dimensions | 101 × 74 × 23 mm |
| Weight | 128 ‡ 1 g |
| Housing | Plastic |
| Assembly | Cable ties / double-sided adhesive tape |
Additional documentation