Self installed device FTx datasheet
Related Manuals
FTx datasheet
Benefits:Real-time fleet monitoring, Driver behavior monitoring, Fuel monitoring, Driver identification (future plans).
| Detailed specifications | FTx |
|---|---|
| Enviromental specifications | Temperature: Operating: -20 to +60 °C Storage: -20 to +45 °C Battery charging: 0 to +45 °C Battery discharging: -20 to +60 °C Relative humidity: 5% to 95% Non-condensing |
| Electrical Specifications | Power supply range: 9-30 V DC Internal battery: LiPo 3.7 V 140 mAh Protections: Battery power line short circuit protection Reverse polarity protection Overvoltage protection Electrostatic discharge protection on USB, SIM card slot |
| Connectivity | Modem: Quectel BG95-M3 Bands (2G GSM): 850/900/1800/1900 MHz Bands (4G LTM): B1/B3/B5/B8/B18/B19/B20/B28 U-blox M10- GNSS module Antenna: Internal Positioning systems: GPS, GLONASS, Galileo Bluetooth module: BLE version: 5.1 Low energy; Module: nRF52833; Antenna: Internal |
| Interfaces | Power Supply: Pins - 4 (Ground), 5 (Signal ground), 16 (Power supply) Purpose -To power the device Parameters - Voltage range 9-30 V DC CAN Interface: Pins - 6 (CAN High), 14 (CAN Low) Purpose - To read OBD data from vehicle on-board systems Applications - OBD data and DTC reading K-Line/L-Line: Pins - 7 (K-Line), 15 (L-Line) Purpose - To read OBD data from vehicle on-board systems Applications - OBD data and DTC reading User interfaces: Micro USB interface Indication LED |
| Features | Internal storage: 16MB Accelerometer: Built-in 3-axis (auto-calibrating, impact detection, motion sensing, tilt detection, g-force up to 16 g) |
| Certifications | E-mark, CE, FCC / IC /PTCRB/ AT&T/Rodgers/Telus |
| Physical Properties | Dimensions: 75 x 51 x 27 mm Weight: 65 ± 2 g Housing: Black Plastic |
Standard Configuration
| Reason | FTx settings |
|---|---|
| Min.Period | 60 seconds |
| Min.Distance | 1000 meters |
| Min.Angle | 15 degrees of direction change |
| HeartBeat | 1 hour |
| Sleep mode | After 5 minutes since ignition OFF |
| Ignition sensing | Advanced multifactor virtual ignition mechanism checking conditions like a physical signal on OBD port, voltage, movement, GPS movement etc. |
Verticals
FTx device can be used in the following verticals:
- Business
- Transportation
Use cases
Advanced tracking when self-install is required on vehicles with OBDII port.